jueves, 10 de marzo de 2011

Subida de archivos a nuestro sitio web

   En esta entrada vamos a explicar como subir archivos (.pdf, .doc, etc) a nuestro sitio web. Vamos a utilizar como ejemplo el menú de "Registro de calidad", pero el proceso de carga de archivos en nuestra intranet será igual para cualquier tipo de menú (Anexos, etc.).

   Para conseguir los archivos que necesitamos debemos ir a la antigua intranet de la Biblioteca Regional de Murcia y tenemos que entrar en el apartado "Calidad y Medio Ambiente" -> Registro de Calidad.

   Una vez allí, guardaremos todos los archivos que nos aparecen listados. Lo más rápido será descargarnos por ftp todo el contenido de la carpeta con el nombre de "calidad/registros".

   Cuando tengamos todos los archivos descargados nos iremos a la nueva intranet y localizaremos el nodo al que está enlazado el menú "Registro de calidad", en este caso se tratra del nodo 88.

   Escribimos http://enlacesis.com/intranet/node/88 en la barra de direcciones de nuestro navegador y cuando estemos visualizando el nodo pinchamos en editar.




   Abajo nos aparecen algunos ficheros que ya hemos subido al portal. Para continuar subiendo archivos simplemente tenemos que pinchar en "Examinar" y seleccionar el archivo que queramos subir. Una vez seleccionado pincharemos en "Subir".

   Ahora nos aparece el campo "Descripción" en el que tendremos que pegar el texto de la página de la intranet antigua que hace referencia a ese fichero.
   Una vez subido y puesto el texto, pincharemos en "Add another item" y repetiremos el proceso hasta subirlos todos.

   Es recomendable ir guardando cada 5 archivos subidos, con el fín de que si se produce algún tipo de problema no se pierda el trabajo realizado hasta el momento.
Leer más...

miércoles, 9 de marzo de 2011

Abrir o descargar archivos desde un enlace de nuestro sitio web

   Para abrir un archivo o descargarlo desde nuestra intranet haciendo click sobre un menú o enlace, solamente tenemos que subir, vía ftp, dicho archivo a nuestra carpeta de Drupal y colocarlo dicho archivo en la ruta "enlacesis.com/intranet/sites/default/files.

   La ruta anteriormente indicada seguida del nombre del archivo en cuestión será la que tengamos que colocar en el campo "ruta" del menú.
Leer más...

martes, 8 de marzo de 2011

Crear una galería de galerías (imágenes y videos)

   Para la creación de una "galería de galerías" vamos a utilizar el módulo "views". Una vez descargado, lo intalamos y activamos siguiendo el proceso rutinario de instalación de módulos en Drupal 6.

A continuación vamos a Administrar - Views - Add e insertamos los siguientes valores:
font>
  • View Name: Galería.
  •  Type: nodo


Pincha sobre la imagen para ampliarla

   Ahora pinchamos en el "+"  que hay junto a "Filtro" y en los campos nuevos que nos aparecen selecionamos lo siguiente:
  • Groups: nodo
  • Marco Nodo: tipo
Pinchamos en "Add".
Pincha sobre la imagen para ampliarla


   Seleccionamos "Galeria_de_imagenes" y pinchamos en actualizar.
   De nuevo pinchamos en el "+"  que hay junto a "Filtro" y en los campos nuevos que nos aparecen selecionamos lo siguiente:
  • Groups: nodo
  • Marco Nodo: publicado
   Pinchamos en "Add" y en marco seleccionamos "Si" y actualizamos.

  Volvemos a pinchar en el "+"  que hay junto a "Filtro" y en los campos nuevos que nos aparecen selecionamos lo siguiente:
  • Groups: contenido.
  • Marco: imágenes.
  Pinchamos en "Add" y en marco seleccionamos lo siguiente:
  • Marco: groups multiple values.
  • Show: 1.
  • Starting from 1.
  • Format: redimension1 image linked to node.
   Actualizamos.

   Ahora pinchamos en el "+"que hay junto a "Fields" y seleccionamos lo siguienye:
  • Groups: nodo.
  • Marco: título.
   Pinchamos en "add" y en "Marco" seleccionamos "Link this Field to its node" y pinchamos en "Actualizar".

   A continuación pinchamos "Add display" para crear la nueva vista y pasaremos a definir el nombre de la vista, la ruta y el link en el menú.

  • Pinchamos en "Basic Settings" - "Título", ponemos "Galería de imágenes" y actualizamos.
  • Pinchamos en "Basic Settings" - "Style", seleccionamos "Cuadrícula" y actualizamos.
  • Pinchamos en "Page Settings" - "Ruta" y ponemos "galería_imágenes".
  • Pinchamos en "Page Settings" - "Menú" - "Normal" y como"Título" ponemos "Galería de imágenes".
   Seleccionamos el menú en el que queremos situar la vista. En este caso hemos seleccionado "Galería Audiovisual".

   Para la galería de vídeos repetiremos el mismo proceso, con las siguientes diferencias:
  • En Tipo de nodo seleccionamos "Galeria Videos".
  • En "Contenido", en lugar de imágenes seleccionamos video y en format "redimension1 image linked to node".
   Por supuesto, la ruta y el menu de la vista que creamos para la galería de videos debe ser distinta.
Leer más...

lunes, 7 de marzo de 2011

Galería de videos

   Vamos a instalar una galería de vídeos para nuestra intranet. Nos descargaremos el módulo "Embedded Media Field y activamos los siguientes módulos :

                   Embedded Image Field
                   Embedded Inline Media
                   Embedded Media Field
                   Embedded Media Thumbnail
                   Embedded Video Field
                   Embedded Wave Field
   También tenemos que descargarnos los módulos de los proveedores tal y como se explica en la misma página en la que nos hemos descargado el módulo.
   Hemos descargado el módulo del proveedor "youtube" y lo hemos instalado y activado.
Leer más...

domingo, 6 de marzo de 2011

Redimensionando las imágenes de la galería

   Como complemento a la galería de imágenes que hemos instalado vamos a utilizar una herramienta que nos proporciona Drupal para redimensionar las imágenes subidas y,así, poder darles el tamaño que deseemos.

   Utilizaremos el módulo "Imagecache" que ya tenemos instalado (lo hemos instalado cuando instalamos todos los módulos necesarios para la galería de imágenes).

   Nos vamos a Administrar - Construcción del sitio - Imagecache - Add new preset.

 
Pincha sobre la imagen para ampliarla



   En el campo "Título" colocamos el nombre que le vamos a dar al "preset", en nuestro caso lo llamaremos "redimensión", y pinchamos en "Save preset".

   Se nos abre una pantalla en la que debemos definir la función de este nuevo preset. Lo que necesitamos es que escale las imágenes, pues bien pinchamos en "add scale" y ponemos en el ancho (por ejemplo) 120px y el alto vacio para que la imagen se quede proporcional y pinchamos en "create action".

   Podemos crear más acciones como agregar marcas de agua, o pasar todas las imágenes a blanco y negro, etc.

Pincha sobre la imagen para ampliarla


   A continuación, nos vamos a Administrar - Administración de contenido - Tipos de contenido  y hacemos click en "editar galería_de_imágenes". Pinchamos en ""pinchamos en display fields.

   Ahora en el campo "full node", seleccionamos "lightbox2 slideshow redimension->original". Esto sirve para indicar como se va a mostrar el campo imagen en el cuerpo: va a ser una galería lightbox2 donde se van a mostrar las imágenes con el preset "redimension" y cuando pinchemos sobre la imagen se va a ver el original.
Leer más...

sábado, 5 de marzo de 2011

Galería de imágenes

   Otra herramienta más que vamos a implementar en nuestro sitio web para que los usuarios de la intranet la mantengan "viva" es una galería fotográfica.

   Para instalar la galería de imágenes necesitamos instalar y activar los siguientes módulos:
  • ImageApi: Este módulo hay que activarlo antes que ImageCache, de otro modo el portal se rompería por completo. Activaremos lo siguiente: 
                             ImageAPI
                             ImageAPI GD2
                             ImageCache (después de activar el ImageAPI)
                             ImageCacheUI
  • ImageCache: Este módulo sirve para cachear las imágenes antes de mostrarlas y que la carga de la página sea menor.
  • Lightbox2: Un modulo que ejecuta un script para la superposición de imágenes.
   Una vez instalados los módulos, crearemos un nuevo tipo de contenido desde Administrar - Administración de contenido - Tipos de contenido - Añadir tipo de contenido que llamaremos "galeria_de_imagenes". En el desplegable de "Opciones del flujo de trabajo" desmarcaremos el checkbox de "Colocado en la página principal".

Pincha sobre la imagen para ampliarla


   A continuación, nos vamos a Administrar - Administración de contenido - Tipos de contenido - Galería_de _imágnes - Editar - Manage Fields y añadimos un nuevo campo con los siguientes valores:
  • Etiqueta: Imagen
  • Field name: Image
  • Type: File
  • Widget: Image

Pincha sobre la imagen para ampliarla

   Pinchamos en guardar y nos salta a la siguiente ventana:
  • Texto de ayuda: Utilice este campo para adjuntar las imágenes
  • Permited upload file extension: png, gif, jpg, jpeg (imagecache no soporta bmp a la hora de redimensionar)
  • File path: galeria
  • Obligatorio: Si
  • Number of values: ilimitadoList Field: desactivado (si lo activamos saldría un listado de los nombres de la imágenes)
   Finalmente, guardamos las configuraciones y Arrastramos el campo "Imagenes" tras el titulo.

   Ahora ya podemos crear la Galería de imágenes, pinchando en "Crear Contenido" y como tipo de contenido Galeria_de_imagenes.
   Insertamos el título, y en imagenes, pinchamos en "examinar", seleccionamos la imagen y pinchamos en subir. Si queremos subir más imágenes pinchamos sobre "add another item" y repetimos el proceso tantas veces queramos.


Pincha sobre la imagen para ampliarla

   Para colocar la galería en nuestra pantalla de inicio, crearemos un menú llamado "Galería audiovisual" y lo colocaremos en el "second sidebar".
Leer más...

viernes, 4 de marzo de 2011

Sitios webs construidos con Drupal

Leer más...

Creación de blogs

   Uno de los propósitos más importantes de este proyecto es hacer que todos los usuarios de la Biblioteca Regional de Murcia participen de manera activa en su intranet,   poniendo en común todas los proyectos, ideas, inquietudes,etc. que puedan tener.. Por eso, nuestro objetivo es proporcionarle una herramienta  adecuada para que puedan llevar a cabo dicho propósito. La herramienta que les vamos a proporcionar son,  entre otras, los blogs.

   Crearemos un blog por área en el que todos los miembros de dicha área podrán crear entradas. Los miembros de otras áreas no podrán crear entradas en blogs diferentes del área al que pertenecen. Esta restricción de seguridad la conseguiremos creando un usuario registrado por cada blog.


   Para la creación de los blogs vamos a utilizar un módulo que viene con el núcleo de Drupal llamado "blogs". Para ello vamos a Administrar - Construcción del sitio - Módulos

Pincha sobre la imagen para ampliarla


   Nos dirigimos a Administración - Administración de usuarios - Permisos y asignamos permisos a todos los usuarios para crear y borrar entradas y para editar las entradas propias.


Pincha sobre la imagen para ampliarla

   A continuación, crearemos tantos usuarios como blogs necesitemos crear. La creación de usuarios la haremos desde Administrar - Administración de usuarios - Usuarios - Agregar usuario


Pincha sobre la imagen para ampliarla


   En esta pantalla introduciremos el nombre del usuario, su correo electrónico y su contraseña. Los usarios que vamos a crear serán tantos como áreas tiene la Biblioteca Regional de Murcia. Como nombre le pondremos el nombre del área y como contraseña el mismo nombre pero terminado en 1.

   Ahora nos dirigimos a Crear contenido - Entrada de blog y creamos una entrada de blog para cada usuario (área). Una vez creada nos vamos a la página principal de cada uno de los blogs y nos anotamos el número de blog de cada una de las áreas (nos aparecerá con el formato http://enlacesis.com/intranet/blog/5). Debemos tomar nota de todos los números de blog de cada área.


   A continuación añadiremos un nuevo elemento a cada área del menú de áreas y como ruta le colocaremos la dirección del blog correspondiente.


   Finalmente vamos a colocar los blogs en nuestra pantalla de inicio. Para ello nos dirigimos a Administrar - Construcción del sitio - Bloques y en la lista de bloques desactivados busacamos un bloque que muestra las últimas entradas de blog. Lo colocamos en "second sidebar" y en "configurar" le cambiamos el nombre a "Últimas noticias".


Pincha sobre la imagen para ampliarla

   Automáticamente las últimas entradas de cada blog se irán publicando en la página de inicio (front) de nuestro sitio web. De esta forma los usuarios de cada área mantendrán totalmente actualizada y "viva" la intranet.
Leer más...

jueves, 3 de marzo de 2011

Situando el menú "Áreas" en nuestra pantalla de inicio

   Para situar el menú "Áreas" en la posición que deseemos seguiremos los siguientes pasos. Nos situamos en Administrar - Construcción del sitio - Bloques

Pincha en la imagen para verla en tamaño completo

   En la lista "Desactivado" nos aparecerá nuestro nuevo menú "Áreas". Pincharemos en el desplegable que se encuentra a su derecha y colocaremos nuestro menú en el bloque "Lateral izquierdo".

   Al realizar esto el menú "Áreas" aparecerá activado en la parte correspondiente al bloque "Lateral izquierdo".


Pincha en la imagen para verla en tamaño completo


Leer más...

Otra buena presentación de Drupal

Leer más...

miércoles, 2 de marzo de 2011

Sindicación de contenidos: canales RSS

   Uno de los encagos que nos ha solicitado la Biblioteca Regional de Murcia es el insertar en la página canales de sindicación de contenido que se vayan actualizando constantemente. Para realizar esto vamos a utilizar un módulo que viene con el núcleo de Drupal llamado "Aggregator".

   Nos vamos a Administrar - Construcción del sitio - Módulos y activamos el módulo "aggregator", que sirve para adherirse a canales rss de otras páginas, y para publicar los nuestros propios por si alguien nos quiere sindicar. Tras activarlo, guardamos la configuración.

Pincha sobre la imagen para ampliarla

   En segundo lugar hay que ir a la configuración de este módulo que está en Administrar - Administrador de contenido -  Agregador de canales de noticias - Agregar canal de noticias.

Pincha sobre la imagen para ampliarla

   
   En el campo "Título" pondremos el nombre del canal de noticias del cual queremos hacer una sindicación de contenidos en nuestro sitio web. El primer canal que vamos a agregar es el de Noticias del Ministerio de Cultura (Bibliotecas).

   En el campo "URL" introduciremos la url a sindicar. En este caso concreto http://www.mcu.es/bibliotecas/rss.xml

   En el campo "Intervalo de actualización" se especificaremos cada cuanto tiempo queremos que se "refresce" el contenido sindicado. 

   Ya hemos agregado nuestro primer canal de noticias. Ahora debemos colocarlo en el lugar que deseemos de nuestra página de inicio. Para ello, vamos a Administrar - Construcción del sitio - Bloques.
  Nos desplazamos hasta la lista "Desactivados" y le indicamos al RSS con el título que le habíamos asignado, la región en la que debe aparecer.


Pincha sobre la imagen para ampliarla
 
    En la misma página pinchamos en "configurar", y ahí seleccionamos el título del bloque y el número de noticias a mostrarse en él.


Pincha sobre la imagen para ampliarla
Leer más...

Menú Calidad y Medio Ambiente

   Otro de los menús principales que debemos situar en nuestra página de inicio es el menú de "Calidad y Medio Ambiente" Este menú estará enfocado a albergar menús (enlaces) a nodos que, principalmente, serán de dos tipos:

  • Enlaces a nodos que directamente abran un documento.
  • Enlaces a nodos queutilicemos para la subida de archivos a la intranet.
   El proceso de creación de este menú será exactamente el mismo que el de creación de cualquier menú. Una vez que lo tengamos creado en Administrar - Construcción del sitio - Bloques lo colocaremos en el bloque "First sidebar (left)". Los elementos que forman este menú se podrán consultar en el mapa web de la intranet. 


Leer más...

martes, 1 de marzo de 2011

Formulario de contacto

   Se hace imprescindible en nuestra intranet implementar algun tipo de herramienta que facilite la comunicación entre el personal y los encargados de cada area.

   Para cubrir esta necesidad vamos a utilizar un módulo que incorpora el núcleo de Drupal y que se llama "contact". Nos dirigimos a Administrar - Construcción del sitio - Módulos y, una vez allí, marcamos el checkbox del módulo "contact" .


Pincha sobre la imagen para ampliarla


   Ahora vamos a añadir las direcciones de correo electrónico a los que se enviarán los e-mail cuando se envie el formulario de contacto. Vamos a Construcción del sitio - Formulario de contacto - Añadir categoría   Cuando el usuario utilice el formulario de contacto le aparecerán estas categorias en un desplegable y deberá elegir una de ellas que será a la que se le envíe el correo electrónico.

Pincha sobre la imagen para ampliarla

   En el campo "Categoría" colocamos el nombre que queramos establecer para esta categoría y en el campo "Destinatarios" introducimos la dirección de correo electrónico a la que llegarán los correos. Tenemos la opción de, en el campo "Respuesta automática" introducir un texto que automáticamente se enviará como respuesta a los correos recibidos, pero nosotros de momento lo dejamos vacio.

   A continuación tenemos que establecer los permisos sobre el módulo "contact" (en Drupal los permisos se establecen sobre los módulos). Nos dirigimos a Administrar - Administración de usuarios - Permisos y marcamos el checkbox de "acceso al formulario de contacto del sitio" para todos los usuarios, tanto para los usuarios registrados, como para los anónimos y, por supuesto, también para los administradores.

Pincha sobre la imagen para ampliarla
  Finalmente para publicar el formulario de contacto en nuestro sitio web, crearemos un menú que se llamará "Contactar" y dentro de éste un nuevo menú llamado "Formulario de contacto". En la ruta de este último formulario introduciremos el nombre del módulo ("contact").

   Aquí se puede apreciar el uso que Drupal hace de los menús, ya que los utiliza tanto, como para llevarte a páginas que has creado (artículos, etc.), como para enlazar directamente con un módulo.
Leer más...

Creación del menú Top

   Los usuarios de la intranet necesitan un medio de acceso rápido a los servicios y aplicaciones que utilizan a diario. Para cubrir esta necesidad vamos a colocar en el menú "Enlaces primarios" todos los enlaces que nos digan que utilizan con más frecuencia.

   Este menú viene predeterminado con Drupal y para acceder a él debemos ir a Administrar - Construcción del sitio - Menús - Enlaces primarios. Una vez allí pincharemos en "Añadir elemento" e iremos añadiendo los elementos que necesitemos. El menú aparecerá en el bloque "Top" de nuestra plantilla.

   A pesar de que la definición de estos elementos no está totalmente cerrada por parte de la Biblioteca Regional de Murcia en el mapa web de nuestra intranet se detallan los elementos que formarán este menú.

Pincha sobre la imagen para ampliarla
Leer más...

lunes, 28 de febrero de 2011

Creación del personal y servicios de cada sección

   Dentro de cada una de las secciones en las que se dividen las áreas tenemos que crear los diferentes servicios que van a prestar dichas secciones, además del personal que compone cada una de ellas. Todos estos servicios están detallados en el mapa web de nuestra intranet.

   El proceso de creación es muy simple. Nos tenemos que situar en el nodo de la sección sobre la que vayamos a trabajar y, mediante el editor de texto enriquecido, crearemos un enlace al nodo del servicio o personal, que previamente hemos creado. Leer más...

Creación de las secciones

   Las secciones son todas aquellos departamentos en los que se divide cada área. En el mapa web de nuestra intranet se pueden ver todas las secciones que debemos de crear.

   Empezaremos creando una sección dentro del área "Dirección" llamada "Secretaría". El proceso de creación es exactamente el mismo que se ha descrito en la entrada "Creación de las diferernts áreas" con la única salvedad de que cuando estamos situados en el desplegable "Elemento padre" tenemos que seleccionar el menú en el que queremos incrustar el nuevo menú de la sección que queremos crear, en este caso corresponde crear la sección de "Secretaría".
Pincha en la imagen para verla en tamaño completo
Leer más...

Creación de las diferentes áreas

   Es el momento de crear todas las áreas que tiene la Biblioteca Regional de Murcia. Estableceremos cada una de las diferentes áreas como un elemento del menú "Áreas". El primer área que vamos a crear es el área de dirección.

   Nos situaremos en Administrar - Construcción del sitio - Menús - Áreas y pinchamos en "Añadir elemento".
Pincha en la imagen para verla en tamaño completo
 

   En el campo "Ruta" se coloca la ruta que queremos enlazar con este menú. Puede ser tanto un enlace externo a una URL web, como un enlace interno a un nodo (node/nº node) de nuestro sitio web, como incluso directamente el nombre de un módulo para acceder a él (por ejemplo, para acceder al módulo de contacto pondríamos "contact" en la ruta). Nosotros lo vamos a enlazar al "nodo 1" que es la primera página estática que hemos creado. Esta página se mostrará cuando pinchemos en el menú "Dirección".

   En el campo "Título del enlace del menú" pondremos el nombre del menú. En este campo es donde iremos colocando los nombres de todas las áreas cada vez que introduzcamos un nuevo elemento al menú "Áreas".

   En el campo "Descripcion" colocaremos la descripción que queramos que aparezca cuando se pasa por encima de este menú. Pondremos también "Dirección".

   Marcaremos el chekbox "Activado" para que el menú direción aparezca listado dentro del menú "Áreas".

   El checkbox "Expandido" sirve para que siempre se muestren desplegados los diferentes submenús que pueda contener un menú concreto. En nuestro caso eso no nos interesa, así que lo dejaremos desmarcado.

   En el desplegable "Elemento padre" seleccionaremos el menú que deseemos que contenga al nuevo menú que estamos creando. Seleccionamos "Áreas".

   El desplegable "Peso" nos sirve para indicar el orden en el que se colocarán los submenús que creemos dentro de cada menú. Se colocará como primer elemento aquel que tenga un "peso" menor, por lo que como queremos que el área "Dirección" aparezca en primera posición le asignaremos el número cero.

   Pinchamos en guardar para aplicar los cambios y ya tenemos listo nuestro primer menú de las áreas.


Pincha en la imagen para verla en tamaño completo

    
Leer más...

domingo, 27 de febrero de 2011

Creación de nuestro primer menú: Áreas

   Uno de los apartados más importantes de nuestro sitio web lo constituyen las diferentes áreas en las que se divide la biblioteca. Se pueden cosultar todas las áreas que forman parte de la Biblioteca Regional de Murcia visitando su mapa web

   Debido a ello vamos a crear un menú en la que ubicaremos todas las áreas. Para ello, nos vamos a Administrar - Construcción del sitio - Menús -Añadir menú.




   En el campo "Nombre del menú" colocaremos un nombre que nos servirá para identificar este menú a nivel de la administración interna de Drupal, es decir, este campo no se mostrará en el sitio web. Este es el nombre que nos aparecerá en el apartado de los bloques de drupal.

   En el campo "Título" introduciremos el nombre que queramos que aparezca en el sitio web: "Áreas.

   En el campo "Descripción" escribiremos el texto que aparecera cuando nos situemos con el ratón sobre el titulo del menú.

   Finalmente pincharemos en "Guardar" y ya tendremos creado nuestro primer menú que nos aparecerá en la lista de los menús. Aquí es donde podremos editarlo para añadirle los elementos (menús y submenús) que necesitamos crear para dar cobertura a las diferentes áreas. Cada vez que se quiera crear un nuevo menú seguiremos los mismos pasos que acabamos de explicar.
Leer más...

Añadiendo menús a Drupal 6

Leer más...

sábado, 26 de febrero de 2011

Creación de contenido (nodos)

   Los nodos son el elemento básico de información que maneja Drupal. Debido a ello tenemos que crear un nodo para cada elemento de nuestro sitio que quiera mostrar algún tipo de información.

   La estructura de los nodos de cada una da las partes del sitio web están definidas en el mapa web del sitio. Dicha estructura determina como será la página que veremos cuando pinchemos en cualquier menú, tanto de áreas, como de secciones, servicios, personal, etc.

   Como ejemplo vamos a crear nuestro primer nodo que será la pantalla que se mostrará cuando pinchemos en el menú "Dirección". La crearemos en forma de "página estática" (en nuestro caso hemos cambiado este nombre, que viene por defecto en Drupal, por el de "artículo").

   Para empezar nos situamos en Crear contenido - Artículo.


   En el campo "Título" escribiremos el nombre del menú que corresponda (en este caso "Dirección") y en el body del artículo se colocará lo que necesitemos que muestre la página.

  Una vez que guardemos los cambios tenemos que fijarnos en la barra de direcciones ya que ahí nos aparece en número de nodo que acabamos de crear y que tenemos que utilizar cuando queramos enlazar cualquier menú a este artículo o página estática. (node/2)



   Deberemos crear tantos artículos como necesitemos ya que esta es la principal forma que tiene Drupal de mostrar el contenido.
Leer más...

viernes, 25 de febrero de 2011

Mapa web de la Intranet

Pincha aquí para ver el mapa del sitio web y todas las especificaciones en cuanto a contenido, diseño y estructura que tendrá nuestro sitio web.
Leer más...

jueves, 24 de febrero de 2011

Problemas surgidos con los editores de texto enriquecido

   Hemos instalado el módulo "Wysiwyg", que es un wrapper("envoltorio" para editores de texto) bastante genérico, que nos brinda la posibilidad de trabajar con diferentes editores de texto enriquecido.

   Como editor de texto hemos utilizado el "Ckeditor". En principio parecía que iba a funcionar ya que mostraba todos los botones de la barra de texto enriquecido, pero no ha sido así, ya que no aplica el formato que nosotros le damos al texto.

   El siguiente intento lo hemos hecho con el editor de texto enriquecido "Fckeditor", pero hemos obtenido los mismos resultados, es decir, sigue sin aplicar el formato al texto.

   A continuación, hemos probado con el editor "Tinymce", pero con este se nos ha presentado el problema de que las etiquetas html las coloca entre corchetes ([])en vez de utilizar los símbolos <>, por lo que ha sido otro intento fallido.

   Otro intento más ha sido utilizar el "Openswing" pero este nos ha dado el problema de que nos descuadra el margen derecho por lo que hubieramos tenido que deshabilitar todo el contenido del "second sidebar", cosa que no nos interesa en absoluto, ya que el diseño que se nos ha encomendado comtempla la introducción de varios menús en esa parte de la plantilla.
Leer más...

Instalación de módulo para el uso de texto enriquecido

   Llamamos texto enriquecido al texto que nos permite aplicar formatos, cursiva, negritas, sangrías, etc. Para ello necesitamos que nuestro editor disponga de ese soporte. Para ello se requiere instalar un módulo que hará de wrapper (contenedor) y un editor wysiwyg.

   WYSIWYG es el acrónimo de What You See Is What You Get (en inglés, "lo que ves es lo que obtienes"). Se aplica a los procesadores de texto y otros editores de texto con formato (como los editores de HTML) que permiten escribir un documento viendo directamente el resultado final, frecuentemente el resultado impreso.
 
   Después de hacer lo de siempre para instalar un módulo que es:

1) Buscar el que nos interesa
2) Descargarlo
3) Descomprimirlo.
4) Subirlo a nombredelsitio/sites/all/modules

   Para nuestra web hemos elegido un editor llamado CKEditor que es uno de los más completos, funcionales, testeados y con una amplia comunidad de desarrollo.

   Desde aquí buscamos el módulo CKEditor (el wrapper) y lo instalamos. Desde aquí descargamos la última versión del editor y lo subimos a la siguiente ruta: /nombredelsitio/sites/all/modules/ckeditor/ckeditor

   A continuación debemos activarlo:
 
Administrar --> Construcción del sitio --> Módulos --> Activar CKEditor

   Para configurar las opciones:
Administrar --> Configuración del sitio --> CKEditor (Aquí modificamos los perfiles a nuestro gusto)

   Por último para terminar de instalarlo hemos de modificar el fichero: misitio/sites/default/settings.php y descomentar la linea: $cookie_domain = 'aquí pones la url del sitio web';

   Ya está hecho, cuando agreguemos o editemos contenido tendremos un editor de texto enriquecido.
Leer más...

miércoles, 23 de febrero de 2011

Color Picker: personalizando colores de nuestra plantilla.

   El módulo Color Picker nos ha sido muy útil a la hora de elegir exactamente los colores que necesitamos para nuestra plantilla, ya que con este módulo podemos obtener el código hexadecimal de cualquier color y asi podemos ir aplicando exactamente el mismo color en todos los lugares que queramos en nuestra platilla.

   Además de activar el módulo Color Picker (versión 6.x-2.1), tenemos que activar el módulo Color Picker Widget del módulo CCK. Leer más...

martes, 22 de febrero de 2011

Primer módulo para nuestro sitio web: CCK

   El Content Construction Kit es uno de los módulos contribuidos, es decir, que no forman parte del núcleo, básicos de Drupal para implementar sitios webs complejos de forma fácil e intuitiva. A través de este módulo, podemos crear tipos de contenido personalizados que nos permitirán tener la información de nuestras páginas más organizada y acesible.

   Un tipo de contenido (content type) es parte de esta terminología (o casi podríamos llamarlo idioma) que utiliza Drupal, se refiere a un elemento (de tipo nodo) con características y atributos propios. Es decir, que, gracias a CCK, podemos construir nuestros propias entidades de información a través de una interfaz de usuario.

   Tras descargar y descomprimir el módulo y, como caso excepcional, lo vamos a colocar en la misma carpeta en la que Drupal coloca sus módulos por defecto ya que podemos considerar CCK como un módulo básico de Drupal, pues muchos otros módulos dependen de él.

   Accediendo a Administrar-Construcción del sitio-Módulos comprobaremos que CCK se ha instalado correctamente.

   De igual forma, será en esta pantalla donde tendremos que activar,desactivar o desinstalar todos los módulos que vayamos necesitando para nuestro sitio web.
Leer más...

lunes, 21 de febrero de 2011

Activación y configuración de la plantilla CTI_flex

   Para activar la plantilla CTI_flex nos identificamos como administrador en nuestro sitio web y accedemos a "Administrar","Construcción del sitio","Temas".


    A continuación marcaremos la casilla "Activación" de nuestra plantilla CTI_flex y haciendo click en "Configurar" accederemos a la pantalla de configuración de nuestra plantilla en la que modificaremos los colores,fuentes,etc, de acuerdo con los colores corporativos de la Biblioteca Regional de Murcia y también colocaremos el logo correspondiente
Leer más...

Elección de la plantilla para nuestro sitio web

  Vamos a utilizar la plantilla "cti_flex".

  La podemos conseguir en el siguiente enlace: http://drupal.org/project/cti_flex.


  Para poder utilizar esta plantilla previamente tenemos que tener instalada en nuestro Drupal la plantilla "Zen" (http://drupal.org/project/zen) en el mismo directorio que vamos a instalar CTI flex, ya que CTI flex depende de Zen.


  Para la instalación de la plantilla subiremos vía FTP las dos plantillas que nos hemos descargado a la carpeta de nuestro sitio web (enlacesis.com/intranet/sites/all/themes).


Leer más...

domingo, 20 de febrero de 2011

Como instalar un módulo en Drupal

Leer más...

Instalación de módulos y themes en Drupal 6

   Para instalar los módulos en Drupal 6 seguiremos los siguientes pasos: 
  1. Elegimos el módulo que se ajuste a nuestras necesidades.
  2. Descargamos el archivo, lo descomprimimos y los subimos vía FTP a nuestro sitio web.
   "Intranet" es el nombre del directorio que hemos elegido para nuestro sitio web y que está situado en el directorio "www" de enlacesis.com.

    Drupal 6 organiza sus módulos y themes de la siguiente forma:
  • Los módulos que vienen por defecto con Drupal 6 se encuentran en el directorio /intranet/modules.
  • Los themes que vienen por defecto con Drupal 6 se encuentran en el directorio enlacesis.com/intranet/themes.
  • Los módulos nuevos que necesitemos instalar lo haremos en el directorio /intranet/sites/all/modules. Como caso excepcional instalaremos los módulos que consideremos muy importantes y que son requeridos por muchos otros módulos en el mismo lugar que vienen los módulos por defecto en Drupal 6.
  • Los themes nuevos que queramos instalar lo haremos en el directorio intranet/sites/all/themes.
La inmensa mayoría de módulos y themes que necesitemos los encontraremos en la página de Drupal
Leer más...

sábado, 19 de febrero de 2011

Drupal 6 desde la línea de comandos

   Video que explica con todo detalle como instalar Drupal desde la línea de comandos en un sistema operativo Linux

Leer más...

jueves, 17 de febrero de 2011

martes, 15 de febrero de 2011

Solucionando, por fín, el tema de "register_globals"

Nada, que intentando hacer estos cambios que hemos comentado, no hemos podido debido a que no guardaba los cambios que hacía desde el editor de dinahosting del php.ini



De nuevo pedidos soporte a nuestro proveedor:

Espere por favor, mientras un operador le responde.

Esta chateando con 'Iván Ramallo'.

Iván Ramallo: Hola, en qué puedo ayudarte?

Tu: buenas mi nombre de usuario es vamc

Tu: y el final de mi contraseña es .09

Tu: hola Iván

Tu: estoy cambiando en el php.ini

Tu: de mi host enlacesis.com

Iván Ramallo: y no te actualiza los cambios?

Tu: exacto

Tu: y he dejado mas de una hora

Iván Ramallo: un segundo

Tu: y modifico valores y cuando aplico están =, ok me espero

Iván Ramallo: estan cambiados ahora?

Tu: un segundo voy a ver

Tu: ah sisi

Tu: si si

Tu: los he cambiado pero no los guarda

Tu: voy a ver

Tu: nada sigue =

Tu: está el register_globals = On

Tu: lo pongo a Off

Tu: aplico y vuelve a estar en on

Tu: Iván?

Iván Ramallo: si un segundo

Iván Ramallo: donde modificas el php.ini

Tu: desde el panel

Tu: php

Tu: personalización de php.ini

Iván Ramallo: modificalo desde el ftp vi web

Iván Ramallo: via*

Tu: ok un segundo

Tu: donde está el cgi bin

Tu: '

Tu: ?

Tu: Iván? no encuentro el php.ini ni el cgi-bin

Iván Ramallo: correcto lo estaba mirando ahora

Iván Ramallo: por eso no lo cambia

Tu: ya, jeje

Iván Ramallo: coge el fichero por defecto del servidor

Tu: si

Iván Ramallo: crealo manual mente y avisame y ya te reinicio apache para que no esperes una hora

Tu: primero el directorio cgi-bin y después el php.ini dentro de este, no?

Iván Ramallo: correcto

Tu: ok 5 segundos

Iván Ramallo: como lo llevas?

Tu: bien terminado

Tu: pero el editor del ftp via web no funciona

Tu: lo he hecho en local y lo he subido

Tu: y apuedes reiniciar el apache si eres tan amable

Iván Ramallo: ok, listo

Tu: Cuando intentas crear un fichero nuevo desde el fto via web, cuando empieza a abrirse el editor, se carga en esa ventana la página principal de dinahosting, que lo tengáis en cuenta.

Tu: MIL GRACIAS

Tu: voy a comprobarlo si te parece déjame un segundo

Tu: por fa

Iván Ramallo: de nada, no te preocupes espero

Tu: al pelo

Tu: mil gracias

Tu: buenas noches

Iván Ramallo: igualmente

Iván Ramallo: un saludo!

Tu: otro
Tu: adios

La sesion de chat ha sido terminada por el operador.

La transcripción de esta sesión de chat se enviará a info@enlacesis.com al terminar.
Leer más...

lunes, 14 de febrero de 2011

Solución primer problema [register_globals está activado]

   Modificamos en nuestro php.ini la entrada "register_globals" y la ponemos a off (estaba activada a "on") por lo queda de la siguiente forma:

register_globals = Off 


  Al hacer los combios, nuestro proveedor de hosting nos informa que los cambios podrán tardar hasta una hora en verse reflejados en el hosting.

  Y nuestro php.ini al completo ahora mismo está como lo mostramos abajo:

[PHP]

;;;;;;;;;;;;;;;;;;;
; About php.ini ;
;;;;;;;;;;;;;;;;;;;
; This file controls many aspects of PHP's behavior. In order for PHP to
; read it, it must be named 'php.ini'. PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory. The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
;
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
;
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
;
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
;
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
;
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
;
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
;
; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
;
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
;
;
;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; This is the recommended, PHP 5-style version of the php.ini-dist file. It
; sets some non standard settings, that make PHP more efficient, more secure,
; and encourage cleaner coding.
;
; The price is that with these settings, PHP may be incompatible with some
; applications, and sometimes, more difficult to develop with. Using this
; file is warmly recommended for production sites. As all of the changes from
; the standard settings are thoroughly documented, you can go over each one,
; and decide whether you want to use it or not.
;
; For general information about the php.ini file, please consult the php.ini-dist
; file, included in your PHP distribution.
;
; This file is different from the php.ini-dist file in the fact that it features
; different values for several directives, in order to improve performance, while
; possibly breaking compatibility with the standard out-of-the-box behavior of
; PHP. Please make sure you read what's different, and modify your scripts
; accordingly, if you decide to use this file instead.
;
; - register_long_arrays = Off [Performance]
; Disables registration of the older (and deprecated) long predefined array
; variables ($HTTP_*_VARS). Instead, use the superglobals that were
; introduced in PHP 4.1.0
; - display_errors = Off [Security]
; With this directive set to off, errors that occur during the execution of
; scripts will no longer be displayed as a part of the script output, and thus,
; will no longer be exposed to remote users. With some errors, the error message
; content may expose information about your script, web server, or database
; server that may be exploitable for hacking. Production sites should have this
; directive set to off.
; - log_errors = On [Security]
; This directive complements the above one. Any errors that occur during the
; execution of your script will be logged (typically, to your server's error log,
; but can be configured in several ways). Along with setting display_errors to off,
; this setup gives you the ability to fully understand what may have gone wrong,
; without exposing any sensitive information to remote users.
; - output_buffering = 4096 [Performance]
; Set a 4KB output buffer. Enabling output buffering typically results in less
; writes, and sometimes less packets sent on the wire, which can often lead to
; better performance. The gain this directive actually yields greatly depends
; on which Web server you're working with, and what kind of scripts you're using.
; - register_argc_argv = Off [Performance]
; Disables registration of the somewhat redundant $argv and $argc global
; variables.
; - magic_quotes_gpc = Off [Performance]
; Input data is no longer escaped with slashes so that it can be sent into
; SQL databases without further manipulation. Instead, you should use the
; function addslashes() on each input element you wish to send to a database.
; - variables_order = "GPCS" [Performance]
; The environment variables are not hashed into the $_ENV. To access
; environment variables, you can use getenv() instead.
; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
; By default, PHP suppresses errors of type E_NOTICE. These error messages
; are emitted for non-critical errors, but that could be a symptom of a bigger
; problem. Most notably, this will cause error messages about the use
; of uninitialized variables to be displayed.
; - allow_call_time_pass_reference = Off [Code cleanliness]
; It's not possible to decide to force a variable to be passed by reference
; when calling a function. The PHP 4 style to do this is by making the
; function require the relevant argument by reference.
; - short_open_tag = Off [Portability]
; Using short tags is discouraged when developing code meant for redistribution
; since short tags may not be supported on the target server.

;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
engine = On

; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
zend.ze1_compatibility_mode = Off

; Allow the tags are recognized.
; NOTE: Using short tags should be avoided when developing applications or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable code,
; be sure not to use short tags.
short_open_tag = On

; Allow ASP-style tags.
asp_tags = Off

; The number of significant digits displayed in floating point numbers.
precision = 14

; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
y2k_compliance = On

; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit. You can enable output buffering during runtime by calling the output
; buffering functions. You can also enable output buffering for all files by
; setting this directive to On. If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of 'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = 4096

; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.
;output_handler =

; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
zlib.output_compression = Off
;zlib.output_compression_level = -1

; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off

; The unserialize callback function will be called (with the undefined class'
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func =

; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100

; Whether to enable the ability to force arguments to be passed by reference
; at function call time. This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend. The encouraged method of
; specifying which arguments should be passed by reference is in the function
; declaration. You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each time
; you use this feature, and the argument will be passed by value instead of by
; reference).
allow_call_time_pass_reference = Off

;
; Safe Mode
;
safe_mode = Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = Off

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =

; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =

; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
;
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_

; This directive contains a comma-delimited list of environment variables that
; the end user won't be able to change using putenv(). These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH

; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
;open_basedir =

; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =

; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_classes =

; Colors for Syntax Highlighting mode. Anything that's acceptable in
; would work.
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000

; If enabled, the request will be allowed to complete even if the user aborts
; the request. Consider enabling it if executing long request, which may end up
; being interrupted by the user or a browser timing out.
; ignore_user_abort = On

; Determines the size of the realpath cache to be used by PHP. This value should
; be increased on systems where PHP opens many files to reflect the quantity of
; the file operations performed.
; realpath_cache_size=16k

; Duration of time, in seconds for which to cache realpath information for a given
; file or directory. For systems with rarely changing files, consider increasing this
; value.
; realpath_cache_ttl=120

;
; Misc
;
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
expose_php = Off


;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

max_execution_time = 30 ; Maximum execution time of each script, in seconds
max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
;max_input_nesting_level = 64 ; Maximum input variable nesting level
memory_limit = 96M ; Maximum amount of memory a script may consume (128MB)


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; error_reporting is a bit-field. Or each number up to get desired error
; reporting level
; E_ALL - All errors and warnings (doesn't include E_STRICT)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often result
; from a bug in your code, but it's possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it's automatically initialized to an
; empty string)
; E_STRICT - run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best interoperability
; and forward compatibility of your code
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
;
; Examples:
;
; - Show all errors, except for notices and coding standards warnings
;
;error_reporting = E_ALL & ~E_NOTICE
;
; - Show all errors, except for notices
;
;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
;
; - Show only errors
;
;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
;
; - Show all errors, except coding standards warnings
;
error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR

; Print out errors (as a part of the output). For production web sites,
; you're strongly encouraged to turn this feature off, and use error logging
; instead (see below). Keeping display_errors enabled on a production web site
; may reveal security information to end users, such as file paths on your Web
; server, your database schema or other information.
;
; possible values for display_errors:
;
; Off - Do not display any errors
; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
; On or stdout - Display errors to STDOUT (default)
;
; To output errors to STDERR with CGI/CLI:
;display_errors = "stderr"
;
; Default
;
display_errors = Off

; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed. It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off

; Log errors into a log file (server-specific log, stderr, or error_log (below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = On

; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
log_errors_max_len = 1024

; Do not log repeated messages. Repeated errors must occur in same file on same
; line until ignore_repeated_source is set true.
ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; source lines.
ignore_repeated_source = Off

; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
report_memleaks = On

;report_zend_debug = 0

; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off

; Disable the inclusion of HTML tags in error messages.
; Note: Never use this feature for production boxes.
;html_errors = Off

; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://www.php.net/docs.php
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used including
; the dot.
; Note: Never use this feature for production boxes.
;docref_root = "/phpmanual/"
;docref_ext = .html

; String to output before an error message.
;error_prepend_string = ""

; String to output after an error message.
;error_append_string = ""

; Log errors to specified file.
;error_log = filename

; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog


;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3

; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&"

; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"

; This directive describes the order in which PHP registers GET, POST, Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC). Registration is done from left to right, newer
; values override older values.
variables_order = "GPCS"

; Whether or not to register the EGPCS variables as global variables. You may
; want to turn this off if you don't want to clutter your scripts' global scope
; with user data. This makes most sense when coupled with track_vars - in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
;
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off

; Whether or not to register the old-style input arrays, HTTP_GET_VARS
; and friends. If you're not using them, it's recommended to turn them off,
; for performance reasons.
register_long_arrays = On

; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information). If you don't use these variables, you
; should turn it off for increased performance.
register_argc_argv = On

; When enabled, the SERVER and ENV variables are created when they're first
; used (Just In Time) instead of when the script starts. If these variables
; are not used within a script, having this directive on will result in a
; performance gain. The PHP directives register_globals, register_long_arrays,
; and register_argc_argv must be disabled for this directive to have any affect.
auto_globals_jit = On

; Maximum size of POST data that PHP will accept.
post_max_size = 20M

; Magic quotes
;

; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = Off

; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
magic_quotes_runtime = Off

; Use Sybase-style magic quotes (escape ' with '' instead of \').
magic_quotes_sybase = Off

; Automatically add files before or after any PHP document.
auto_prepend_file = "/www/cgi-system/php_auth.php"
auto_append_file =

; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
;
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"

; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data = On


;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
;
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"

; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
doc_root =

; The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =

; Directory in which the loadable extensions (modules) reside.
extension_dir = "/usr/local/php5/lib/php/extensions/no-debug-non-zts-20060613/"

; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
enable_dl = On

; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
cgi.force_redirect = 1

; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request.
; cgi.nph = 1

; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;

; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
cgi.fix_pathinfo=1

; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; fastcgi.impersonate = 1;

; Disable logging through FastCGI connection
; fastcgi.logging = 0

; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0


;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
;upload_tmp_dir =

; Maximum allowed size for uploaded files.
upload_max_filesize = 20M


;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On

; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
allow_url_include = Off

; Define the anonymous ftp password (your email address)
;from="john@doe.com"

; Define the User-Agent string
; user_agent="PHP"

; Default timeout for socket based streams (seconds)
default_socket_timeout = 60

; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; auto_detect_line_endings = Off


;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
;
; If you wish to have an extension loaded automatically, use the following
; syntax:
;
; extension=modulename.extension
;
; For example, on Windows:
;
; extension=msql.dll
;
; ... or under UNIX:
;
; extension=msql.so
;
; Note that it should be the name of the module only; no directory information
; needs to go here. Specify the location of the extension with the
; extension_dir directive above.

;extension=bcmath.so
extension=bz2.so
;extension=dba.so
;extension=dbx.so
extension=gmp.so
;extension=interbase.so
;extension=ming.so
;extension=mssql.so
extension=pdo_mysql.so
;extension=pdo_pgsql.so
extension=shmop.so
;extension=soap.so
extension=sockets.so
extension=zip.so

;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[Date]
; Defines the default timezone used by the date functions
;date.timezone =

;date.default_latitude = 31.7667
;date.default_longitude = 35.2333

;date.sunrise_zenith = 90.583333
;date.sunset_zenith = 90.583333

[filter]
;filter.default = unsafe_raw
;filter.default_flags =

[iconv]
;iconv.input_encoding = ISO-8859-1
;iconv.internal_encoding = ISO-8859-1
;iconv.output_encoding = ISO-8859-1

[sqlite]
;sqlite.assoc_case = 0

[xmlrpc]
;xmlrpc_error_number = 0
;xmlrpc_errors = 0

[Pcre]
;PCRE library backtracking limit.
;pcre.backtrack_limit=100000

;PCRE library recursion limit.
;Please note that if you set this value to a high number you may consume all
;the available process stack and eventually crash PHP (due to reaching the
;stack size limit imposed by the Operating System).
;pcre.recursion_limit=100000

[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling define_syslog_variables().
define_syslog_variables = Off

[mail function]
; For Win32 only.
SMTP = localhost
smtp_port = 25

; For Win32 only.
;sendmail_from = me@example.com

; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
sendmail_path = /usr/bin/phpmailer

; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =

[SQL]
sql.safe_mode = Off

[ODBC]
;odbc.default_db = Not yet implemented
;odbc.default_user = Not yet implemented
;odbc.default_pw = Not yet implemented

; Allow or prevent persistent links.
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
odbc.check_persistent = On

; Maximum number of persistent links. -1 means no limit.
odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
odbc.max_links = -1

; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
odbc.defaultlrl = 4096

; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1

[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
mysql.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
mysql.max_links = -1

; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
mysql.default_port =

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =

; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =

; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysql.default_password =

; Maximum time (in seconds) for connect timeout. -1 means no limit
mysql.connect_timeout = 60

; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off

[MySQLi]

; Maximum number of links. -1 means no limit.
mysqli.max_links = -1

; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
mysqli.default_port = 3306

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysqli.default_socket =

; Default host for mysql_connect() (doesn't apply in safe mode).
mysqli.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).
mysqli.default_user =

; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysqli.default_pw =

; Allow or prevent reconnect
mysqli.reconnect = Off

[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
msql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
msql.max_links = -1

[OCI8]
; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
;oci8.privileged_connect = Off

; Connection: The maximum number of persistent OCI8 connections per
; process. Using -1 means no limit.
;oci8.max_persistent = -1

; Connection: The maximum number of seconds a process is allowed to
; maintain an idle persistent connection. Using -1 means idle
; persistent connections will be maintained forever.
;oci8.persistent_timeout = -1

; Connection: The number of seconds that must pass before issuing a
; ping during oci_pconnect() to check the connection validity. When
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
; pings completely.
;oci8.ping_interval = 60

; Tuning: This option enables statement caching, and specifies how
; many statements to cache. Using 0 disables statement caching.
;oci8.statement_cache_size = 20

; Tuning: Enables statement prefetching and sets the default number of
; rows that will be fetched automatically after statement execution.
;oci8.default_prefetch = 10

; Compatibility. Using On means oci_close() will not close
; oci_connect() and oci_new_connect() connections.
;oci8.old_oci_close_semantics = Off

[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
pgsql.auto_reset_persistent = Off

; Maximum number of persistent links. -1 means no limit.
pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
pgsql.max_links = -1

; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
pgsql.ignore_notice = 0

; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
pgsql.log_notice = 0

[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
sybase.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybase.max_links = -1

;sybase.interface_file = "/usr/sybase/interfaces"

; Minimum error severity to display.
sybase.min_error_severity = 10

; Minimum message severity to display.
sybase.min_message_severity = 10

; Compatibility mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results according
; to their Sybase type, instead of treating them all as strings. This
; compatibility mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off

[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
sybct.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybct.max_links = -1

; Minimum server message severity to display.
sybct.min_server_severity = 10

; Minimum client message severity to display.
sybct.min_client_severity = 10

[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0

[browscap]
;browscap = extra/browscap.ini

[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =

; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =

; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =

; Allow or prevent persistent links.
ifx.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
ifx.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
ifx.max_links = -1

; If on, select statements return the contents of a text blob instead of its id.
ifx.textasvarchar = 0

; If on, select statements return the contents of a byte blob instead of its id.
ifx.byteasvarchar = 0

; Trailing blanks are stripped from fixed-length char columns. May help the
; life of Informix SE users.
ifx.charasvarchar = 0

; If on, the contents of text and byte blobs are dumped to a file instead of
; keeping them in memory.
ifx.blobinfile = 0

; NULL's are returned as empty strings, unless this is set to 1. In that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0

[Session]
; Handler used to store/retrieve data.
session.save_handler = files

; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
;
; As of PHP 4.0.1, you can define the path as:
;
; session.save_path = "N;/path"
;
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
;
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
;
; The file storage module creates files using mode 600 by default.
; You can change that by using
;
; session.save_path = "N;MODE;/path"
;
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
;session.save_path = "/tmp"

; Whether to use cookies.
session.use_cookies = 1

;session.cookie_secure =

; This option enables administrators to make their users invulnerable to
; attacks which involve passing session ids in URLs; defaults to 0.
; session.use_only_cookies = 1

; Name of the session (used as cookie name).
session.name = PHPSESSID

; Initialize session on request startup.
session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0

; The path for which the cookie is valid.
session.cookie_path = /

; The domain for which the cookie is valid.
session.cookie_domain =

; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
session.cookie_httponly =

; Handler used to serialize data. php is the standard serializer of PHP.
session.serialize_handler = php

; Define the probability that the 'garbage collection' process is started
; on every session initialization.
; The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts
; on each request.

session.gc_probability = 1
session.gc_divisor = 1000

; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440

; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm

; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, albeit register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled.

session.bug_compat_42 = 0
session.bug_compat_warn = 1

; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =

; How many bytes to read from the file.
session.entropy_length = 0

; Specified here to create the session id.
session.entropy_file =

;session.entropy_length = 16

;session.entropy_file = /dev/urandom

; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter = nocache

; Document expires after n minutes.
session.cache_expire = 180

; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publically accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
session.use_trans_sid = 0

; Select a hash function
; 0: MD5 (128 bits)
; 1: SHA-1 (160 bits)
session.hash_function = 0

; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
;
; 4 bits: 0-9, a-f
; 5 bits: 0-9, a-v
; 6 bits: 0-9, a-z, A-Z, "-", ","
session.hash_bits_per_character = 5

; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1

; Minimum error severity to display.
mssql.min_error_severity = 10

; Minimum message severity to display.
mssql.min_message_severity = 10

; Compatibility mode with old versions of PHP 3.0.
mssql.compatability_mode = Off

; Connect timeout
;mssql.connect_timeout = 5

; Query timeout
;mssql.timeout = 60

; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096

; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096

; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0

; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On

; Use NT authentication when connecting to the server
mssql.secure_connection = Off

; Specify max number of processes. -1 = library default
; msdlib defaults to 25
; FreeTDS defaults to 4096
;mssql.max_procs = -1

; Specify client character set.
; If empty or not set the client charset from freetds.comf is used
; This is only used when compiled with FreeTDS
;mssql.charset = "ISO-8859-1"

[Assertion]
; Assert(expr); active by default.
;assert.active = On

; Issue a PHP warning for each failed assertion.
;assert.warning = On

; Don't bail out by default.
;assert.bail = Off

; User-function to be called if an assertion fails.
;assert.callback = 0

; Eval the expression with current error_reporting(). Set to true if you want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0

[COM]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constant registrations
;com.autoregister_verbose = true

[mbstring]
; language for internal character representation.
;mbstring.language = Japanese

; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
;mbstring.internal_encoding = EUC-JP

; http input encoding.
;mbstring.http_input = auto

; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output = SJIS

; enable automatic encoding translation according to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
;mbstring.encoding_translation = Off

; automatic encoding detection order.
; auto means
;mbstring.detect_order = auto

; substitute_character used when character cannot be converted
; one from another
;mbstring.substitute_character = none;

; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
;mbstring.func_overload = 0

; enable strict encoding detection.
;mbstring.strict_encoding = Off

[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.show_timestamp_decimals = Off
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128

[gd]
; Tell the jpeg decode to libjpeg warnings and try to create
; a gd image. The warning will then be displayed as notices
; disabled by default
;gd.jpeg_ignore_warning = 0

[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
; With mbstring support this will automatically be converted into the encoding
; given by corresponding encode setting. When empty mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola and
; intel byte order. A decode setting cannot be empty.
;exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel = UCS-2LE
;exif.encode_jis =
;exif.decode_jis_motorola = JIS
;exif.decode_jis_intel = JIS

[Tidy]
; The path to a default tidy configuration file to use when using tidy
;tidy.default_config = /usr/local/lib/php/default.tcfg

; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html content
; such as dynamic images
tidy.clean_output = Off

[soap]
; Enables or disables WSDL caching feature.
soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.
soap.wsdl_cache_dir="/tmp"
; (time to live) Sets the number of second while cached file will be used
; instead of original one.
soap.wsdl_cache_ttl=86400

; Local Variables:
; tab-width: 4
; End:


[Zend]
zend_extension=/usr/local/ioncube/ioncube_loader_lin_5.2.so
zend_extension_manager.optimizer=/usr/local/Zend-php5/lib/Optimizer-3.3.3
zend_extension_manager.optimizer_ts=/usr/local/Zend-php5/lib/Optimizer_TS-3.3.3
zend_optimizer.version=3.3.3



;***** Added by go-pear
include_path=".:/usr/local/pear/PEAR"
;*****


zend_extension=/usr/local/Zend-php5/lib/ZendExtensionManager.so
zend_extension_ts=/usr/local/Zend-php5/lib/ZendExtensionManager_TS.so
Leer más...